Dodge Challenger Forum banner

1 - 8 of 8 Posts

·
Premium Member
Joined
·
197 Posts
Discussion Starter #1
Is this the correct part number for the splitter off of a Scat Pack


Sent from my LG-H918 using Tapatalk
 

·
Registered
Joined
·
410 Posts

·
Premium Member
Joined
·
197 Posts
Discussion Starter #3

·
Registered
2017 Challenger T/A Plus
Joined
·
77 Posts
You will need the filler panels/extensions (#6 on dia.) L and R about $24 ea. Installation is not straight forward. Requires removal of front bumper cover. Can be done at home with simple had tools. I left it to the dealer cause I am in an apartment now. Was a bargain at 1 hr labor.
 

·
Premium Member
Joined
·
197 Posts
Discussion Starter #5
You will need the filler panels/extensions (#6 on dia.) L and R about $24 ea. Installation is not straight forward. Requires removal of front bumper cover. Can be done at home with simple had tools. I left it to the dealer cause I am in an apartment now. Was a bargain at 1 hr labor.
No big deal on removing bumper cover. Thanks

Sent from my LG-H918 using Tapatalk
 

·
Registered
Joined
·
155 Posts
i won't say its easier but i did mine without removing the bumper cover in about 2-1/2 hours.i really didn't want to believe that the whole cover has to come off for the spoiler.i took my time doing it and prob could do it in half the time now that i know all involved.the hardest part was laying on my back to do it.
 
1 - 8 of 8 Posts
Top