Dodge Challenger Forum banner
1 - 19 of 19 Posts

·
Registered
2015 Challenger ScatPack
Joined
·
227 Posts
Discussion Starter · #1 ·
So first please excuse the poor quality, I haven't had chance to take some pro pics yet.

Drop completed Monday afternoon. I don't have before measurements but I'd assume yours are going to be close?

After drop and sitting 24 hours.
Measurements are from ground to fender. Tolerance ~ 1/16"

Front driver's side: 29" Passenger: 28 7/8"
Rear driver's side: 29 7/8" Passenger: 29 11/16

I really wish I had measured before but was in a rush to get it done on a rare day off but if you could give me an idea of how much it dropped that'd be awesome.

I'll get some good pics at first chance!
 

Attachments

·
Registered
Joined
·
16,102 Posts
I measured a Scat Pack on dealer lot and it was:

Front spoiler - 6.5"
Front fender - 29.5"
Rear fender - 30.5"


Sent from AutoGuide.com Free App
 

·
Registered
Joined
·
94 Posts
How long did it take you to complete the swap? Do you notice any difference in the ride?
 

·
Registered
2015 Challenger ScatPack
Joined
·
227 Posts
Discussion Starter · #6 ·
How long did it take you to complete the swap? Do you notice any difference in the ride?
I had my dealer do it, the ride felt fairly stock, maybe slightly tighter.only put a few miles on it getting it home.
 

·
Premium Member
Joined
·
4,612 Posts
Give it a few weeks to settle. You'll have to refer to your photos as reference.
FYI: I have a 2013 R/T Classic with STP and Stage 1 Springs. I was parked next to a Scat Pack, and it looked to me like my belt line was about 3 inches lower than his stock Scat Pack when I looked to my left at his door.
 
  • Like
Reactions: Trever1t

·
Registered
Joined
·
380 Posts
how much did the springs and installation run?
 

·
Registered
2015 Challenger ScatPack
Joined
·
227 Posts
Discussion Starter · #11 ·
Springs from Steve White, forget the price but I had the dealer install for around $625
 

·
Registered
Joined
·
850 Posts
Did mine a couple weeks ago. Measured before and after. Dropped exactly 1/2" all way around. Pretty disappointing for me. At the same time I didn't want it too low because of speed bumps and driveway. My price was about the same at my dealer.
 

·
Registered
Joined
·
850 Posts
I just measured again. It's 1/8" lower now making it total of 5/8" but today I filled up my tank so maybe that had some effect. :scratchhead:
 

·
Registered
Joined
·
16 Posts


That is perfect and exactly what I want to do. I just picked up my 16 Scat Pack and want to lower it about 1/2 inch to lessen the gap without having to worry about speed bumps and driveways too much. After it settled, how did the ride change versus stock? Also, what is the measurement from ground to front spoiler.
Thanks!
 
1 - 19 of 19 Posts
Top