Dodge Challenger Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter #1
I bought a SSE off e-bay from The Challenger Store. Checked the ohms and I get a reading of 25 ohms. Everything I've read says it should 250. Will this thing work without throwing a code? I can't take the 1-4 thing anymore. It comes on when you least expect it . I thought I read somewhere if it's 250 or lower it should be good. Any help. Thanks.
 

·
Registered
Joined
·
100 Posts
You must have had the meter on the wrong scale, it's supposed to be 2.5K ohms.
 

·
Registered
Joined
·
1,399 Posts
Actually 250 Ohms is the correct value for a 6 speed 2009 car.
I cant say for more recent models.
The 2.5K value was for the older T56 tranny's.
Our T6060's require the 250 Ohm one.
 

·
Registered
Joined
·
191 Posts
I am thinking the scale of the ohmeter is off
 
1 - 4 of 4 Posts
Top