Dodge Challenger Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
320 Posts
Discussion Starter #1
I use the TaZer to make some modification to my configuration, as place DRL somewhere else and disable TPMS.

So, because sometime I have to bring a full size spare tire, I bought a tire, a wheel, with no TPMS and to be sure it was OK (no vibration etc), I disabled the TPMS to make test.

But, when I reinstalled the tire with TPMS, I re-activated TPMS to Prem (my car is a Challenger ScatPack 2017), but nothing re-appered in Vehicle info menu about TPMS.
(I'm talking about what we can see on attached picture)

I scroll from oil pressure to oil pressure, TPMS is not there.

I tried to de-activate TPMS again, close all, go out of the car, let it stand for at least 5 minutes, re-activate. Nothing.

I also unplugged the battery 1/2 hour… without success.

The TPMS setting is Prem.
I checked more than once. :wink3:

Firmware version of my TaZer: 2.3.1-060517 (the last avalaible on site)

Somebody met this problem?

I also wrote an email to ZAutomotive.
 

Attachments

·
Premium Member
Joined
·
320 Posts
Discussion Starter #2
Already an update:

If a tire is in low pressure, the screen goes back, I have the "chime" , but no warning light at left, in the center of the RPM.

In fact, this light seems to be completly dead now.

It does not turn on then off at start-up.
 

·
Premium Member
Joined
·
320 Posts
Discussion Starter #3
OK... answer from Zautomotive (can be useful for 2017 owners):

"Yes I am aware of a recent discovery that TPMS doesn't come back when re-activated on 2017's. I'll have new firmware out to fix that within a week or two. It was just brought to my attention by another customer a few days back. "
 
1 - 3 of 3 Posts
Top