[cJroseland]

Looking to purchase a spoiler (model 1ZB40RXFAJ) like the picture. It does not come with an install template. I know I could be careful and probably measure everything out, but I would feel much better with the template. Any ideas, or would someone happen to have one lying around?

Sent from my Pixel XL using Tapatalk

 

[cJroseland]

BTW - it doesn't have any spoiler installed

Sent from my Pixel XL using Tapatalk

 

[wlemer]

Make one.Get some posterboard or thin cardboard and tape together to make a piece large enough.Place the spoiler on the posterboard.Locate the holes on the spoiler and put the bolts through from under the posterboard through it and into the spoiler.Trace the outline of the spoiler on the posterboard,Remove the spoiler and cut on the outline you traced.You now have a template you can place on your car,tape in place and drill the holes.Put some touch up paint on the edges of the holes to prevent rust.A few little dabs of silicone won't hurt either.

 

[cJroseland]

Thanks. I'll give it a shot. Did you install your own?

Sent from my Pixel XL using Tapatalk