Dodge Challenger Forum banner
1 - 13 of 13 Posts

· Registered
Joined
·
586 Posts
110% yes. i got a full srt leather interior for 800 shipped on ebay. they were brand new never put in a car. I mean i got everything. Front seats, back seats(not just the leathers i mean rails, harness, everything), center console with shift handle and armrest. its really easy actually but id have to give you specific details when you actually get them. Doing it myself took about 2 hours but thats because im ocd and had to figure it out on my own.
 

· Registered
Joined
·
434 Posts
I've been interested in doing this as well but I was thinking about just swapping out my rt foam backs for the larger srt foam backs and then getting new katskinz covers. But I'm interested in what changes need to be made for swapping out the entire seat


Sent from AutoGuide.com App
 

· Registered
Joined
·
586 Posts
The easiest and best thing to do is swap the harness. srt seats usuall come with heated seats. you wont use those connectors. unplug everything from your rt seats and just swap the harness to the srt seats. only reason you have to do this is because the connectors in the floor are different. or it would be a 15min swap. its super easy and i got no airbag light. everything works like factory. you just dont use the heated parts of the seat because the car wasnt wored for it. not really needed here in florida anyway. you have to stalk ebay for them. i know i did for a couple months. its really easy if im honest. just a couple tricks i learned doing it myself
 

· Registered
Joined
·
586 Posts
nooooo the airbags stay. the only thing i didnt use in mine was the heated seat parts. there are wires that come off the pad from inside the seat that have a connector on them. if your rt didnt have heated seats you wont use the heated connectors. everything else is plug and play. power seat, lumbar, air bag, air bag activator tube (i assume thats what it is) its all plug and play. everything is the same because youre using your factory rt harness. so all the features your rt seats had your srt seats will also have :) there is a special socket for the seat bolt though. i have an autozone part number if you ever need it :)
 

· Premium Member
Joined
·
419 Posts
If you haven't found a set of seats yet I've got the seats out of my Magnum SRT8 for sale. The fronts will work, not 100% sure on the rears.
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top