Dodge Challenger Forum banner

1 - 20 of 25 Posts

·
Premium Member
Joined
·
677 Posts
Very nice. You forgot the free clutch delay valve delete, done at the same time you put in the skip shift eliminator. :)
 

·
Registered
Joined
·
1,493 Posts
Discussion Starter #3
Very nice. You forgot the free clutch delay valve delete, done at the same time you put in the skip shift eliminator. :)
You're right. That'll go in Part II. :grin2:
 

·
Registered
Joined
·
4,294 Posts
Catch can should be included too IMO. Once again, good article Rob!
 

·
Registered
Joined
·
1,493 Posts
Discussion Starter #5
Catch can should be included too IMO. Once again, good article Rob!
Thanks, my man. Had to hold some mods back for part II. ;)
 

·
Registered
Joined
·
219 Posts
Nice. Clear concepts.I'd add bigger tires. (I. E. From 245 to 275 ) . if I would do a priority list, STRUT BRACE is 1st position IMO.

Sent from my LG-H872 using Tapatalk
 

·
Registered
Joined
·
1,493 Posts
Discussion Starter #7
Nice. Clear concepts.I'd add bigger tires. (I. E. From 245 to 275 ) . if I would do a priority list, STRUT BRACE is 1st position IMO.

Sent from my LG-H872 using Tapatalk
Copy that. The mods were listed in terms of price, from cheapest to most expensive. ;)
 
  • Like
Reactions: flyhalf

·
Registered
Joined
·
1,493 Posts
Discussion Starter #10

·
Registered
Joined
·
185 Posts
This is excellent. Can’t argue with any of the choices. Look forward to “part two”!
 
  • Like
Reactions: RobF

·
Registered
Joined
·
1,493 Posts
Discussion Starter #12
This is excellent. Can’t argue with any of the choices. Look forward to “part two”!
Cheers, buddy. Thanks. ;)


What are your favorite mods for part II?


- Rob
 

·
Registered
Joined
·
1,493 Posts
Discussion Starter #13
***** bump *****
 

·
Registered
Joined
·
1,493 Posts
Discussion Starter #14
***** bump *****
 

·
Registered
2015 RT 5.7 M6
Joined
·
8,867 Posts
You forgot:

fuzzy dice
headers (short or long)
LED fog lights (stock bulbs are ugly low lumens)
window tint
forced induction...best HP/dollar
cam/heads...second best hp/dollar (best if labor is not included)

Looks like you may need a part III. :banana:
 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
20,782 Posts
But "Low cost"? ;)

A Guy
 

·
Registered
2015 RT 5.7 M6
Joined
·
8,867 Posts
But "Low cost"? ;)

A Guy

I do have low cost items, in fact the first 4. The cam and SC are up their in cost but that could be for part III...maybe do a section on most bang for your buck comparing HP/dollar. I collected most of the dyno and build info from API's site which I am putting together for the 5.7L. :wink3:
 

·
Registered
Joined
·
1,488 Posts
NOT LOW COST!!!! Just happens to be stuff they sell! Hmmmmm....
What is "low cost to some; isn't to others!
Examples:


DIY is low-cost!!!!





PlastiDip is low cost!





Plastic Welting is lo cost!



Footwell lighting is low cost!




DIY painting is low cost!






OK! Enough said!
 
1 - 20 of 25 Posts
Top