Dodge Challenger Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 6 of 6 Posts

·
Registered
Joined
·
415 Posts
Discussion Starter · #1 ·
For those who have 20x10 torq thrust M's with 295/40 on the rears do you get any rubbing on the fender side? I believe they are plus 18mm off set. I don't want to roll my fenders at this point. A slight rub on the plastic inner fender wall is acceptable.
 

·
Registered
Joined
·
1,020 Posts
For those who have 20x10 torq thrust M's with 295/40 on the rears do you get any rubbing on the fender side? I believe they are plus 18mm off set. I don't want to roll my fenders at this point. A slight rub on the plastic inner fender wall is acceptable.
I'm running this exact set up...plus lowered a little on Eibach Pro springs. Hardly ever rub. I took a couple of 230 plus pound guys on a trip and when we hit a dip in the road, then a little rub happened but only then. I have not rolled the fenders. I'm very happy with the set up.
 

·
Registered
Joined
·
415 Posts
Discussion Starter · #6 ·
I'm running this exact set up...plus lowered a little on Eibach Pro springs. Hardly ever rub. I took a couple of 230 plus pound guys on a trip and when we hit a dip in the road, then a little rub happened but only then. I have not rolled the fenders. I'm very happy with the set up.
Thank you, that is what I needed to hear. Wheels are ordered.
 
1 - 6 of 6 Posts
Top