[DADNSONCAR]

Hey does anyone know what the torque spec is for the 17 inch stock wheels on the SE, I'm putting my stock wheels back on til the snow is over.

 

[itzrick]

I don't know that I've seen 17" mentioned anywere but SE and RT according to the owners manual are 100ft pounds but on an earlier post this came up from a very reliable source.
100 is about right for 1/2" or 12mm studs
110 is correct for the 14mm studs used on all challengers.

listen to the chrysler engineers on this one. 110 ft/lbs is best

 

[DGibson]

always did mine at 110 lbs

 

[DADNSONCAR]

Thanks guys got them set at 110.

 

[fradaj]

I just snug them up real good. Then just a little bit more.