Dodge Challenger Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hi,
I bought a 2010 challenger rt shell and put a 392 engine inside. My problem is that none of the controls work. I scanned the forum and some say it can be the steering column control module but how do I know if it is bad? Also I checked fuse 30 and it is good. Any help or suggestions is appreciated. (Hazards, headlights and brake lights work)
 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
20,760 Posts
The common to these items is the SCCM/Multi-function/Turn signal Switch. I believe the SCCM is a part of the Multi-function switch, and the whole shebang gets replaced. As long as you don't have a bad fuse/relay, this is the most likely culprit. I don't know how you confirm before trying, a dealer may be able to tell. A Guy
 
1 - 2 of 2 Posts
Top