Dodge Challenger Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I've got a 3 port USB hub I'd like to install somewhere so I can run a few accessories (dash cam, bluetooth transmitter, extra usb port). I'm trying to have it go from ignition switched on power but am not sure if tapping into a existing power source will overload with that many accessories. I'm trying to keep this all semi hidden to I don't have to plug directly into the cigarette lighter. Any advice or directions would be greatly appreciated.
 

·
Premium Member
Joined
·
2,397 Posts
What year is your car?

In my '09, I did tap into the cigarette lighter wiring to run wires for an after market XM radio unit. I popped off the console trim piece to get at the wiring behind the cigarette lighter. I could hide most of the wires.
 

·
Registered
Joined
·
130 Posts
i would also do the cigarette lighter in the console. i did that on my 12 for the dash cam and radar. cigarette lighter is good for 150 watts typically.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #4
I've got a 14'. I found a thread on tapping into the cigarette lighter, so I think I'll go that route. Thanks fellas
 
1 - 4 of 4 Posts
Top