Dodge Challenger Forum banner

Autocross tire wheels sizes

7.9K views 17 replies 9 participants last post by  TheFrankenberry  
May depend on the wheel also. I'm running 275s/295s on Scat pack replica wheels that clear the knuckle. That all said, I am so frustrated with fighting brake issues, I went to Cleveland Power and Performance and ordered a 4 piston Brembo upgrade off a Charger SRT, which includes knuckles. Only question now is if 18's will clear those 4 piston Brembos. I think they will. I was pretty sure they would not clear the 6 piston Brembos, so even though those are what I wanted, I did not order them. When I get it all together, I'll share. View attachment 987724
They should clear the Brembos, but like you said it depends on the wheel. You may need to run a spacer. I was running 18s when I had my Brembos. I've since upgraded to 6 piston Wilwoods and still can run 18s.

Sent from my SM-S907VL using Tapatalk
 
I ran factory 245s all around at my first event. I bought some Scat Pack replica 10.5 wheels and put 295s on them, but they rubbed the knuckle in the front. So then I have been running staggered past 2 months, 9" front wheels with 275s and the 295s on the rear. Kumho's. This is not a bad set up because it forces understeer. The Kumho Ecstas are not bad, price wise not bad. I've got 10 runs on them so far. However, I am participating in NASA and I eventually want to run American Iron. That limits you to 18" wheels. I've not found any decent width of 18" tires, that is anywhere close to the stock height. In a way that is good because it helps me with gearing, but I'd really like to get closer to what I have running the 245s or 275s on 20's. And I'd prefer to run square.
What year and model car do you have?

Sent from my SM-S907VL using Tapatalk