Are the connections and wiring the same as the other kit you wrote about? (82212110) Thank you

 

I'm interested! Could you custom mount in the same place as the trunk release?

 

Looks like a good kit, but does anyone have a pic of it mounted on their car? Would like to see where it goes exactly and how noticable it is before comitting myself.

 

That thing is huge? Where does it mount?

I went with the lockpic it is barely noticeable as it is the top of the license plate bracket.

I have to find a pic?

 

I used 82212110 and here's where I mounted mine above the license plate.

 

Do you get a good enough view from that angle?

 

It works well enough for me, the image looks a bit skewed since I'm backed into a diagonal parking space.

For reference the wall where the yellow grid line hits it is about 18 inches away from my bumper.

One caveat of mounting it where I did is you will need to hookup a relay to your reverse light to turn off your license plate lamp at night when reversing, otherwise the license plate lamp will wash out the reverse cam image horribly.

 

same basic wiring, the only thing difference is the white connector doesnt come extra, however its usually found on the back of the radio anyway if the vehicle came with mygig radio....cheaper than the 810 kit, and the camera mount is about the same size as the other, we have been mouting them in the back lower trim of the rear fascia

 

we have been mouting them in the back lower trim of the rear fascia

Ummmmmmmmmm..........no way in h e l l on my car.

JFF

 

Can you turn the lines off? I'd much rather just have the image.

 

With the ultra wide angle lens it has it would be difficult to properly judge distance w/o the lines.

 

this is the kit we were chatting about, right?

 

I'm used to judging distances on wide-angle displays. Personal preference.

 

Luke, Are you saying that my radio already has the plug attached to it even though the Challenger doesn't us it?

 

so far every one that we look at that came with mygig, had the white connector already on the radio
Luke

 

Mine didn't have one, it's a good thing I bought the one from you guys

 

Luke, does Mopar make a license plate camera? It just seems easier to use the 2 license plate screws to mount the camera and run the wires through the vent in the trunk through the interior and back to the radio.

Thanks

 

Stopped at the dealer on the way home. They said it takes 1 hour and will cost $145 to have TIPM flashed. No way I'm paying that. It's cheaper to go the lockpick route.


Sent from my Autoguide iPad app

 

145 is very high, takes approx 30 to 45 minutes to reconfigure the tipm

nothing available for a Challenger period when it comes to back up camera,
Luke

 

Need Help!
Had dealer add option code to my car Friday and flash TPIM. screen did not blank out in reverse. Installed camera over weekend Still does not work. Checked and triple checked connections Power to camera in reverse. Continuity on both signal and return wire. Wires in pin locations as per instructions for 8221346 kit. Made sure XAC code is in list and reflashed several times. checking TIPM config it shows rear camera present not set.

C3 radio plug Cam signal pin 3, Cam return Pin 4, Shield pin 5
Camera Cam return pin 2, cam signal pin 3, ground pin 5, backup feed pin 6


Ant ideas?

 

Need Help!
Had dealer add option code to my car Friday and flash TPIM. screen did not blank out in reverse. Installed camera over weekend Still does not work. Checked and triple checked connections Power to camera in reverse. Continuity on both signal and return wire. Wires in pin locations as per instructions for 8221346 kit. Made sure XAC code is in list and reflashed several times. checking TIPM config it shows rear camera present not set.

C3 radio plug Cam signal pin 3, Cam return Pin 4, Shield pin 5
Camera Cam return pin 2, cam signal pin 3, ground pin 5, backup feed pin 6


Ant ideas?

first make sure back up camera is turn on, need to go into menu function and toggle to on

let me know
or call us at 800-779-3634
thanks
Luke v

 

Sure do need some help!!!!

 

last day of the month, our days go from 10 hours to 20 hours, lol
Luke

 

Had dealer remove camera and save then add camera and save. I think something happened weird when we added it. Going back at 5:30 to try reflash again so far Camera button does not show on radio. Also I noticed hardrive capacity shows 11 Gb when window sticker shows 30 GB. Has thier been an issue with this?

 

not that i know, once the option is properly added, you should see option for the back up camera in the radio menu, also, we have never added a back up source, with the old kit, we wire the connection at the radio, basically 5 wires, 3 to the radio, 2 one for power and one for ground, thats it

when you place the vehicle in reverse, the radio knows its in reverse and activates the screen.....very straight forward connections, however you cannot follow the instructions with the kit, not the same connection, please see our old posting with the pictures of the connector and wire placement
thanks

Luke

 

Thanks Luke where is this posting I have been looking for it?

 

i think it is in this link

http://www.challengertalk.com/forum...k.com/forums/f19/mopar-backup-camera-installed-my-2011-rt-430n-rhb-radio-70987/

 

Been thru that one several times. I surely have a problem with the flas redoing at 5:30. Once radio is functioning properly guess i will know id wiring is an issue too.

 

here is the connector

 

Luke, Thanks for your help and thanks to your tech. Y'all are the BEST.